Industrial Water Chillers — Made in the USA Since 1948
Chillers@RiteTemp.com Request a Quote

Chillers for
Dry Cleaning

Closed-loop water cooling for commercial dry cleaning equipment. The Rite-Temp DCS series was engineered specifically for this industry — eliminating tap water costs while delivering reliable, consistent cooling for wash loads up to 500 lbs.

Request a Quote Call 1.800.462.3120
DCS Series — Dry Cleaning Chillers

Built for the Dry Cleaning Industry

Dry cleaning machines require chilled water to cool solvent recovery and condensing systems during the cleaning cycle. Most dry cleaners historically drew tap water and dumped it to the sewer — a costly practice. A Rite-Temp closed-loop chiller recirculates the same water continuously, eliminating those monthly water and sewer charges entirely.

Rite-Temp's DCS series is the result of over 75 years serving this industry. The new open-tank design offers a larger water volume, removable insulated lid for easy service, and is available in four tonnages to match any commercial dry cleaning operation.

  • Closed-Loop System — Recirculates water to eliminate ongoing tap water and sewer costs.
  • Open Stainless Steel Tank — Larger water volume, easy cleanout, removable insulated lids.
  • Multiple Configurations — Tank/pump/refrigeration all-in-one; modular outdoor condenser; split indoor/outdoor.
  • R422D Refrigerant — EPA-compliant formulation.
  • Compatible with Major Brands — Union, Realstar, Columbia, and others.
  • Copeland Scroll Compressors — Industry-standard reliability in 8, 10, and 12 ton dual-compressor designs.

DCS Series at a Glance

Available Models6, 8, 10, 12 Ton
Tank Material304 Stainless Steel
Tank Volume82–105 Gallons
Pump Output25–30 GPM / 30–35 PSI
RefrigerantR422D
Electrical208–230V / 3-Phase
Built InRogers, Arkansas

Rite-Temp has served the dry cleaning industry since 1948. Call for pricing, lead times, and compatibility with your equipment.

1.800.462.3120 Request a Quote
Model Specifications

DCS Series Model Lineup

All DCS models run on 208–230V / 60Hz / 3-Phase power with a 24V electrical panel. Specifications subject to change — contact us for current data.

DCS6-230

6 Ton
Heat Removal72,000 BTU/hr
Run Load Amps30.7 A
Min. Circuit Ampacity36 A
Max. Circuit Ampacity65 A
Tank82 gal · 16 ga · 304 SS
Pump1 HP · 25–30 GPM · 30–35 PSI
Compressor6-ton Copeland Scroll
Dimensions (W×L×H)46″ × 47″ × 62″

DCS8-230

8 Ton
Heat Removal96,000 BTU/hr
Run Load Amps50 A
Min. Circuit Ampacity53 A
Max. Circuit Ampacity95 A
Tank105 gal · 16 ga insulated · 304 SS
Pump1 HP · 25–30 GPM · 30–35 PSI
CompressorDual (2) 4-ton Copeland Hermetic
Dimensions (W×L×H)53″ × 54″ × 60″

DCS10-230

10 Ton
Heat Removal120,000 BTU/hr
Run Load Amps61.2 A
Min. Circuit Ampacity67 A
Max. Circuit Ampacity120 A
Tank105 gal · 16 ga · 304 SS
Pump1 HP · 25–30 GPM · 30–35 PSI
CompressorDual (2) 5-ton Copeland Hermetic
Dimensions (W×L×H)53″ × 54″ × 60″

DCS12-230

12 Ton
Heat Removal144,000 BTU/hr
Run Load Amps54 A
Min. Circuit Ampacity59 A
Max. Circuit Ampacity106 A
Tank105 gal · 16 ga · 304 SS
Pump1 HP · 25–30 GPM · 30–35 PSI
CompressorDual (2) 6-ton Copeland Scroll
Dimensions (W×L×H)59″ × 57″ × 62″

All specs at 95°F ambient / 45°F water out. DCS8, DCS10, and DCS12 feature dual independent compressor operation for staged load management. Information subject to change.

Why the DCS Series

Key Features & Benefits

Eliminate Water & Sewer Costs

Closed-loop recirculation ends the costly practice of drawing tap water and dumping it to the sewer after each cooling cycle.

Open Stainless Steel Tank

Rectangular 304 SS tank with removable insulated lid allows full cleanout and service access — impossible with the old closed cylinder design.

Flexible Configurations

All-in-one unit, modular outdoor condenser, or split indoor/outdoor — Rite-Temp configures the DCS for your space and utility layout.

Remote Control Panel

Optional indoor-mounted remote control panel keeps the interface accessible even when the condenser is installed outdoors or in a remote location.

Staged Dual Compressors

DCS8 through DCS12 use two independent compressors. Staged operation matches cooling output to load, reducing wear and operating costs.

Compatible with Major Brands

DCS chillers are compatible with Union, Realstar, Columbia, and other leading commercial dry cleaning equipment manufacturers.

Common Questions

Dry Cleaning Chiller FAQ

Why do dry cleaning machines need a water chiller?+
Dry cleaning machines require chilled water to cool the solvent recovery and condensing systems during the cleaning cycle. Without a chiller, operators draw tap water and drain it — a practice that generates substantial monthly water and sewer costs. A Rite-Temp closed-loop chiller recirculates the same water, eliminating those ongoing expenses entirely.
What dry cleaning equipment brands are compatible with the DCS series?+
Rite-Temp DCS chillers are compatible with major dry cleaning equipment brands including Union, Realstar, Columbia, and others. Contact us at 1.800.462.3120 to confirm compatibility with your specific equipment model before ordering.
What is the difference between the DCS6 and the larger DCS models?+
The DCS6 uses a single 6-ton Copeland Scroll compressor and an 82-gallon tank. The DCS8, DCS10, and DCS12 all use dual independent compressors with a 105-gallon tank for staged load operation. The larger tank in the 8–12 ton models also provides additional thermal mass for higher-volume operations.
Can a DCS chiller be installed outdoors?+
Yes. Rite-Temp DCS chillers are available in modular configurations with an outdoor air-cooled condenser and indoor tank and pump assembly. The weatherproof electrical panel and low-ambient fan cycling control support outdoor installations. A remote control panel option allows indoor temperature monitoring and adjustment.
What size DCS chiller do I need for my operation?+
DCS chiller sizing depends on your equipment's heat load and the number of machines running simultaneously. A single machine typically requires a DCS6; multiple machines or higher-volume operations may need DCS8, DCS10, or DCS12. Call 1.800.462.3120 and our team will help you size correctly for your specific configuration.

Ready to Eliminate Your Water & Sewer Costs?

Call our Rogers, AR team or request a quote. We'll help you select the right DCS model for your dry cleaning operation.

Request a Quote Call 1.800.462.3120

Ready to Optimize Your Cooling?

Talk to our team about your application. We’ll help you find the right solution.

Request a Free Quote Call 1.800.462.3120